How to Setup SmartDNS on Linksys Router

  1. Find your router's IP. Follow this guide for more information on how to get it.
  2. Log into your router. If you have not set a new username and password, the default is most likely admin/admin.
  3. Choose Basic Setup.
  4. Make sure Enable DHCP is selected.
  5. Fill in DNS servers 212.32.240.145 and 104.200.137.81
  6. Save the settings.
  7. Restart router.

​Important

The first step of troubleshooting should always be to restart the device(s) and router. Then check your setup status in your SmartDNS dashboard. 

Have more questions? Submit a request