How to Setup SmartDNS on Fritz Box

  1. Find your router's IP. Follow this guide for more information on how to get it.
  2. Open your web browser and enter your router's IP in the address bar.
  3. Logon with your password
  4. Go to: System -> View -> Change to Extended View and press apply
  5. Then go to: Internet -> Access data -> DNS-Server
  6. Under heading DNSv4 Servers place dot in Use other DNSv4 Servers
  7. Input 212.32.240.145 and 104.200.137.81 into the Preferred and Alternative fields and press apply
  8. Restart router and your connected devices

 

Disable IPv6

In order to use our DNS you need to make sure IPv6 is disabled on your router as well. It might not be enabled to start with but it's a good idea to check.

  1. Find your router's IP. Follow this guide for more information on how to get it.
  2. Open your web browser and enter your router's IP in the address bar.
  3. Logon with your password
  4. Go to Home Network -> Network
  5. Press IPv6 button under IP addresses
  6. Select Disable DHCPv6 server on FRITZ!box
  7. Click ok

​Important

First step of troubleshooting should always be to restart device(s) and router. Then check your setup status in your SmartDNS dashboard

Have more questions? Submit a request