Setup may vary from TV and Blu-ray player. The below guide is a starting point.
- Press Setup/Settings.
- Select Network.
- Select Network Settings.
- Select IP Address/DNS Settings.
- Go to DNS Auto Configuration ( DHCP ) and set it to Off.
- Go to Primary DNS and set it to 188.8.131.52
- Go to Secondary DNS and set it to 184.108.40.206
- Save settings.
- Restart your device.
The first step of troubleshooting should always be to restart the device(s) and router. Then check your setup status in your SmartDNS dashboard.